Stanley 80 Scraper Plane Replacement Parts

Blades, screws, and tension hardware — everything you need to bring your Stanley 80 back to life.

Missing screws, dull blades, or worn holders can turn a great tool into a dust collector. Woodyah makes precision-fit replacement parts so you can keep your scraper working — with the right feel, right fit, and right threads.

Why Woodworkers Trust Woodyah

• 4-Sided Blades: Exclusive design gives four fresh edges per blade for maximum value.
• Perfect Fit: Built from original Stanley patterns for seamless compatibility.
• Exact Threads: Both 10-28 (pre-Sweetheart) and 1/4-28 (later models) made for a true match.
• Ready to Use: Blades arrive sharpened on all four edges — no grinding required.
• Shop-Tested: Designed for working wood, not just display.

Choosing the Right Screws

The Stanley 80 was produced over many years, and the screw threads changed over time. Before ordering screws Watch this video to know what screws to buy:

• Pre-Sweetheart Era: Uses 10-28 thread. - If you have this you order 2 10-28x3/8 and (1) 10-28x15mm.
  • LINKS: 3 10-28 x 15mm screws, or 2 10-28x2/8 and (1) 10-28 15mm for the blade tension, blade and bar.
• Post-Sweetheart Era: Uses 1/4-28 thread (the later standard below shows it.). I don't offer 3/8 on these. So its (3) 1/4-28 screws
  
  • Links (3) 1/4-28 x 15mm screws (i dont have these shorter yet), blade and bar.

Quick Tip: Use a Q-tip to measure. If the hole is about the same diameter as the Q-tip shaft → it's 10-28. If it's closer to the cotton tip width → it's 1/4-28. For tension screws, use the same logic — they’ll just be the longer screws.

A well-tuned Stanley 80 is one of the most satisfying tools in the shop — and with the right parts, yours can keep scraping clean for decades.

⚠️ Limited stock — order today and keep your scraper in service for years to come.

Woodyah — restoring tools, reviving craftsmanship, and keeping woodworkers in the shop.